MSI P67A-GD65 (B3) Manual - Manual (Page 50)

3-10
BIOS Setup MS-7681
Chapter 3
BIOS Setup MS-7681
Chapter 3
VDroop Control
Ths tem s used to select the VDroop control mode.
CPU Vcore/ CPU IO/ DRAM Voltage/ CPU SA/ CPU PLL Voltage/ DDR_VREF_CA_A/
DDR_VREF_CA_B/ DDR_VREF_DA_A/ DDR_VREF_DA_B/ PCH 1.05
These tems are used to adjust the voltage of CPU, Memory and chpset.
Current CPU Vcore/ Current CPU IO/ Current DRAM Voltage/ Current CPU SA
These tems show current CPU Vcore/ CPU IO/ DRAM/ GPU voltage. Read-only.
Overclockng Profile
Press to enter the sub-menu.
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored profile.
OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot
1/ 3 tmes wth the same overclocked configuraton. If overclockng has faled every
tme, the system wll restore the defaults.
CPU Specficatons
Press to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
CPU Technology Support
Press to enter the sub-menu. The sub-menu shows the nstalled CPU tech-
nologes. Read only.
MEMORY-Z
Press to enter the sub-menu.
DIMM1~4 Memory SPD
Press to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶