MSI PH67S-C43 (B3) - Manual (Page 28)

2-12
Hardware Setup
Mouse/Keyboard
The standard PS/2 ® mouse/keyboard DIN connector s for a PS/2 ® mouse/keyboard.
Clear CMOS Button (optonal)
There s a CMOS RAM on board that has a power supply from external battery to keep
the system configuraton data. Wth the CMOS RAM, the system can automatcally
boot OS every tme t s turned on. If you want to clear the system configuraton, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power off the system before clearng CMOS data.
After pressng ths button to clear CMOS data n power off (G3) state, the system wll
boot automatcally.
Optcal S/PDIF-Out (optonal)
Ths S/PDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dg-
tal audo transmsson to external speakers through an optcal fiber cable.
Coaxal S/PDIF-Out (optonal)
Ths S/PDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dg-
tal audo transmsson to external speakers through a coaxal cable.
IEEE 1394 Port (optonal)
The IEEE 1394 port on the back panel provdes connecton to IEEE 1394 devces.
USB 2.0 Port
The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,
mouse, or other USB-compatble devces.
USB 3.0 Port (optonal)
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
Important
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to the
USB 3.0 port.
▶
▶
▶
▶
▶
▶
▶