MSI 760GMA-P34 (FX) - Manual (Page 16)

6
B
AT
T
+
SCreW hoLeS
When you install the motherboard, you have to place the motherboard into the
chassis in the correct direction. the locations of screws holes on the motherboard
are shown as below.
the
side
has
to
toward
the
rear,
the
position
for
the
i/o
shield
of
the chassis.
Screw holes
refer above picture to install standoffs in the appropriate locations on chassis and
then screw through the motherboard screw holes into the standoffs.
iMPortANt
to prevent damage to the motherboard, any contact between the motherboard
circuit and chassis or unnecessary standoffs mounted on the chassis is pro-
hibited.
Please make sure there is no metal components placed on the motherboard or
within the chassis that may cause short circuit of the motherboard.
*
*