Chapter 3 – MSI B85-G41 PC Mate User Manual
Page 68
Chapter 3
3-10
BIOS Setup
RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled]
Enables this function.
[Disabled]
Disables this function.
RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore]
The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny technology with iRST for SSD. This item
appears when “Intel C-State” is enabled.
[Enabled]
Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled]
Disables this feature.
USB Configuration
Sets the onboard USB controller and device function. Press
menu.
USB Controller [Enabled]
Enables or disables the onboard USB controller.
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto]
The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled]
Enable the USB support for legacy operating systems that do not
support USB.
[Disabled]
The USB devices are available only for UEFI applications.
Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press
to enter the sub-menu.
Serial (COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press
menu.
Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
Serial (COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press
menu.
Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶