MSI Z97S SLI KRAIT EDITION Manual - Manual (Page 67)

Chapter 3
3-10 BOIS Setup 3-11 BIOS Setup
▶Entry After [10 minutes]
Sets a timer for system to enter the sleep mode with Intel Rapid Start
Technology. This item will appear when “Intel(R) Rapid Start Technology” is
enabled. [Options: 1 minute ~ 120 minutes]
▶Active Page Threshold Support [Enabled]
Enables or disables to support Active Page Threshold when the Rapid Start
partition size is less than the system DRAM size.
[Enabled] Enables the additional partition size of SSD for iRST.
[Disabled] Disables this function.
▶Active Memory Threshold
Sets Rapid Start partition size for Active Page Threshold. This item will appear
when “Active Page Threshold Support” is enabled.
Important
The partition size must be larger then the amount of memory.
▶Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled] Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.
▶RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled] Enables this function.
[Disabled] Disables this function.
▶RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
▶LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled] Disables this feature.
▶USB Configuration
Sets the onboard USB controller and device function. Press to enter the sub-
menu.