beautypg.com

Chapter 3 – MSI Z87-G43 GAMING User Manual

Page 78

background image

Chapter 3

3-20

BOIS Setup

3-21

BIOS Setup

3-20

BOIS Setup

3-21

BIOS Setup

CPU VRM Over Temperature Protection [Enabled]

Enables or disables the CPU VRM over-temperature protection.

[Enabled]

Sets the temperature limit on CPU VRM for over-temperature

protection.

[Disabled]

Disables this function.

Digital Compensation Level [Auto]

Sets the current compensation level for CPU PWM when the MOS phases are

changed. If set to "Auto", BIOS will configure this setting automatically. Higher

compensation level provides more overclocking ability.

Imon Overwrite [Auto]

Sets the Imon current for CPU.

[Auto]

This setting will be configured automatically by BIOS.

[Quarter]

Sets the Imon current into quarter.

[Half]

Sets the Imon current into half.

[Disabled]

Sets the default values for Imon current.

Transient Boost [Disabled]

Enables or disables the transient boost.

[Enabled]

Enables this function may lead into a stable system under heavy

system loading.

[Disabled]

Disables this function.

SVID Communication [Auto]

Enables or disables SVID (Serial Voltage Identification) support.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

PWM phase will be changed dynamically according to the CPU SVID

(Serial Voltage Identification).

[Disabled]

Disables SVID (Serial Voltage Identification) support.

VCCIN Voltage [Auto]

Sets the CPU input voltage. The CPU input voltage is the CPU power source that is

shared with components of the CPU.

Current VCCIN Voltage

Shows current CPU VCCIN voltage. Read-only.

CPU Core Voltage Mode/ CPU Ring Voltage Mode/ CPU GT Voltage Mode [Auto]

Selects the control modes for these voltages.

[Auto]

This setting will be configured automatically by BIOS.

[Adaptive Mode]

Sets adaptive voltages automatically for optimizing the system

performance.

[Override Mode]

Allows you to set these voltages manually.

CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto]

Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you

can set it manually.