Chapter 1 – MSI Z97I GAMING AC User Manual

Page 27

Chapter 1

1-13

Getting Started

3. Align the notches with the socket alignment keys. Lower the CPU straight down,

without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is

properly seated in the socket.

4. Close and slide the load plate under the retention knob. Close and engage the

load lever.

Alignment Key

CPU notches

Retention knob

5. When you press down the load lever the PnP cap will automatically pop up from

the CPU socket. Do not discard the PnP cap. Always replace the PnP cap if the

CPU is removed from the socket.

6. Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the

CPU. This will help in heat dissipation and prevent CPU overheating.

PnP cap

Thermal paste