Save & exit -15, Chapter 3, Important – MSI Z87 XPOWER User Manual
Page 85: Save & exit
3-14
BIOS Setup
3-15
BIOS Setup
Chapter 3
3-14
BIOS Setup
3-15
BIOS Setup
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press
To clear a set password, press
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
U-Key [Disabled]
Enables or disables U-Key as user's password to access the system.
Make U-Key at
Makes a key at the USB flash drive to prevent other people from accessing the
system. Only the user who has the key with the flash drive can access the system.
Trusted Computing
Sets TPM (Trusted Platform Module) function.
TPM SUPPORT [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
Chassis Intrusion Configuration
Press
Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to
[Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit
Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes
and exit BIOS setup.
Save Changes and Reboot
This item is used to save all changes and reboot the system.
Save Changes
This item is used to save current changes.
Discard Changes
This item is used to discard current all changes and restore to the previous values.
Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
Boot Override
The installed boot-able devices will appear on this menu, you can select one of them
be a boot device to start booting.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶