Asus P4SDR-VM - Manual (Page 43)

ASUS P4SDR-VM motherboard user guide 2-21
6. CPU, Chassis, and Power Fan Connectors
(3-pin CPUFAN1, CHASFAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
7. Smart Card Reader connector (14-1 pin SMARTCON1)
This connector accommodates a Smart Card Reader that allows you to
conveniently make transactions such as financial, health care,
telephony, or traveling services through a Smart Card user interface
software.
P4SDR-VM
®
P4SDR-VM 12-Volt Cooling Fan Power
CPUFAN1
GND Rotation +12V
CHASFAN1
GND
Rotation
+12V
P4SDR-VM
®
P4SDR-VM Smartcard
SMARTCON1
NC
SCPWR
NC RFU2
NC2 VCC GND
SCIO SCPSNT NC
SCRCLK
1
NC
SCRST