KWorld PC135-AF - Manual (Page 3)

Installing the PCI TV Card:
Please follow the steps below for installing your TV Card:
1. Turn off your computer and any other peripherals.
2. Select an available PCI slot and remove the slot cover and screws.
3. Insert the TV card firmly into the slot until it fits in place and secure the card
by replacing the screw you removed from step 2.
4. Place the PC lid cover back then follow the pictorial chart to insert
antennas and cables.
5. Start your PC. When it is completely booted, the Found New Hardware
Wizard will appear. Please click “Cancel” and proceed continue to the
“Software Installation”.
Connection Chart
Installing the software:
The following steps will guide you through the steps for installing the Arcsoft
TotalMedia software.
1. Once you have properly installed the PCI card, you will see a dialog box of
“Found New Hardware Wizard”. Just click cancel and get ready to insert the
included KWorld installation CD into your CD-ROM drive for a more convenient
installation of the software.
2. Please insert the included installation CD