KWorld VS-L883D - Manual (Page 2)

Chapter 1 : DVD MAKER PCI Hardware Installation
1.1 Package Contents
Unpack your DVD MAKER PCI package and make sure that all items are intact. The following items
should be included in your package:
DVD MAKER PCI
Quick Start Guide
CD-ROM with driver, utilities and multi-language user manuals
CD-ROM with Cyberlink PowerDirector 5 and PowerProducer 4 software
1.2 System Requirements
Intel Pentium 4 2.0GHz or equivalent AMD Athlon
256MB RAM of system memory or above
1 available USB 2.0 port
Graphics Card with 64 MB memory or above (Must Support DirectX 9.0)
Sound Card (AC97 Compatible Sound Card)
2GB Free HD Space
CD-ROM Drive (For software installation)
Microsoft Windows ® XP SP2 / Windows Vista
1.3 Hardware Installation
Please follow the steps shown below for installation of your DVD MAKER PCI and follow the pictorial
guide below for peripheral connections.
1. Turn off your computer power and any peripherals.
2. Select an available PCI slot and remove the slot cover, screw, etc.
3. Push the DVD MAKER PCI card firmly into the slot until it snaps in place and secure the card by
replacing the screw you remove from step 2.
4. Place the PC lid cover back then power on.
2