KWorld HyperMedia Center V3-3 - Manual (Page 3)

3
1.2.1 Input source
「Input Source 」 ：Two options to choose for setting up the frequency table.
Option 1: Select country : Select the country location where you are situated.
Option 2: User define : Maximum frequency, minimum frequency and bandwidth are needed to be set
manually. If you are not sure about the frequency range and bandwidth, please
choose “Select country” to use the default settings.
After finishing setting up, click “Next” to continue.
In this step, it shows the scan range and signal strength. The frequency range depends on the country where
you are situated or user defined setting. The signal strength shows the terrestrial signal receiving status.
When all the settings are checked, click “Start” to scan channels.
Note: Sometimes the signal strength affects the channel scan result. If it could not detect all of the channels,
please check the terrestrial TV signal.
1.2.2 Information Window
Displays current state (Live, REC, Playback, and Time Shifting), TV sound state (Mono, Stereo or SAP),
channel number, recording time, recording file size and current time.