Hogtunes REV 200SG KIT-AA : 2 Channel Amp / Speakers (1998 - 2013 - model years) - Manual (Page 5)

5
wiring the aMplifier
Step #1: Locate the main power harness and plug it into the matching connector
on the amplifier. Locate the 8 pin harness and plug it into “Audio Input”
on the side of the amp.
Step #2: • On the audio input harness, locate the yellow/black pair of wires
with the male connectors.
• Unplug the factory speaker wires on the clutch side of the bike and
plug the yellow/black wires in to those. They will only go in one way.
• Also on the audio input harness, locate the green/black pair of wires
with the male connectors. Unplug the factory speaker wires on the
brake side of the bike and plug the green/black wires in to those.
NOTE: The blue 4 pin plug with black wires on the input harness is an
“expansion port” which is used to send music to a second amp or is
used to send radio power to run other speakers on the bike. You can
see how the expansion port can be used in the system upgrade section
of this manual.
Step #3: • On the opposite side of the amp are 3” (75mm) wires ending with a
4 pin black connector. This plug sends amplified power to your
speakers. Locate 4 pin black plug wire harness with brown/black
and blue/black wires and plug it into the amplified output plug.
• The blue/black wires will plug directly to the speaker on the brake
side of the bike. The brown/black wires will plug directly to the
speaker on the clutch side of the bike.
Step #4: • The orange wire is the “remote turn on lead” and tells the amp to turn
on whenever it sees +12v (.5 amp min.). Unplug the factory center
wire (+) on the cigarette lighter.
• Plug the orange lead from the amplifier directly onto the lighter using
the female connector.
• Plug the factory lighter wire to the male “take off” connector which
is part of the amps orange turn on lead.
Important: If you do not attach the orange wire from
the amp to the center wire at the cigarette lighter, the
amplifier will not turn on. If the factory fuse for your
cigarette lighter is blown and your cigarette lighter
does not work, your amplifier will not turn on.