Safety requirements, Exchanging fuses, Exchanging fuses 7 – RADWAG ZRi02 power supplier User Manual
Page 7
EXI-02-03-06-14-GB
- 7 -
Main subassemblies:
1 – Power cord 230V AC terminated with a plug
2 – LED signalling the presence of output voltage
3 – output supply cable (up to 20m)
4 – Power output plug, for connecting to DC IN
5. SAFETY REQUIREMENTS
The ZRi02 power supplier is an accompanied device and can be
installed only outside a hazardous area.
5.1. Exchanging fuses
Fuses can be exchanged only outside the hazardous area after prior
disconnecting from mains (230V AC).
To change the fuse proceed as follows:
• Disconnect from mains 230V AC
• Unplug the supplier from the indicator
• Unscrew bolts in the Power supply casing
• Take off the insulation coating (pos.3)