Technical specifications – Arcam C30 User Manual

Page 14

Technical specifications

NOTE: All specification values are typical unless otherwise stated.

CONTINUAL IMPROVEMENT POLICY

Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.

C30

P35

Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz

100W

Single channel, 8Ω, 20Hz—20kHz

150W

170W

Both channels, 4Ω, 20Hz—20kHz

140W

Single channel, 4Ω, at 1kHz

200W

250W

Three channels, 8Ω, 20Hz—20kHz

90W

Harmonic distortion, 80% power, 8Ω at 1kHz

0.005%

0.003%

Inputs
Phono cartridge:
Input sensitivity

2.7mV (MM); 270µV (MC)

Input impedance

47kΩ (MM); 300Ω (MC)

Signal/noise ratio (CCIR)

–79dB (MM); –73dB (MC)

Overload margin

35dB

Line and tape inputs:
Nominal sensitivity

250mV—2V

800mV

Input impedance

22kΩ

Signal/noise ratio (CCIR)

–103dB

–110dB

Tone controls, max. boost/cut

±12dB @ 80Hz and 12kHz

Power amplifier input
Nominal sensitivity

800mV

906mV (Arcam gain)

Input impedance

22kΩ

Gain

31.5dB

31.5dB (Arcam gain)

Preamplifier output
Nominal output level

700mV

Maximum output level

8V RMS

Output impedance

<50Ω

Headphone output
Maximum output level into 600Ω

Output impedance

4.7Ω

General
Mains voltage

115V or 230V

Power consumption (maximum)

30VA

800VA (950VA for P35/3)

800VA

Power consumption (standby)

2VA

Dimensions W x D x H (including feet)

430 x 370 x 110mm

430 x 350 x 110mm

Weight (net)

9.3kg

9.5kg (10.5kg for P35/3)

12.5kg

Weight (packed)

11.5kg

12.5kg (13.5kg for P35/3)

15.5kg

Supplied accessories

mains lead
CR-389 remote control
2 x AAA batteries

mains lead

E&OE