WIKA SB15 User Manual
Page 6
GB
4. Technical data / 5. Installation, commissioning and operation
11433094 03/
009 GB/D
WIKA Operating Instructions Safety Temperature Limiter Model SB15
6
Adjustable range:
Fixed, factory pre-set to customer requirements
Standard switch differential
Unlatching after lowering (reducing) the temperature by about 3 % of scale
range possible
Electrical connection
0.8 x 0.63 mm terminal block or AMP plug connection
Case
Plastic (ABS), black or steel
Type of mounting
Panel mounting with clamp
Option
Panel mounting flange
5. Installation, commissioning and operation
When fitting and using the instruments, the following
fundamental requirements must be followed:
The display range of the safety temperature alerter should be chosen
so that the maximum temperature at the sensor does not exceed the
display range. Also, after the switchpoint has been exceeded, a
resultant reheating process has to be taken into account.
In operation the equipment should not be subjected to strong vibration
or impact loads.
Contamination and high ambient temperature fluctuations should be
avoided.
Any break in the capillary will destroy the instrument and result in it
switching off.
Electrical connection
The connection diagram is shown on the instrument label on the
outer rim of the case.