AT&T Generic 1 - Manual (Page 34)

Hold (with Second Dial Tone) ■
Note: The following feature allows you to place or answer another call or activate
another feature while you have a call on hold. If you want merely to put a call on
hold while you are busy with another task (and do not need to answer or place
another call), press
[ Hold ] on your telephone. When you want to return to the held
call, press [ Hold ] again. See “Hold” in the section titled Phone Features.
Version Note: If you are using System 75, Version 1, use these directions:
To put a call on hold 1 Press [ Flash ] [recall dial tone]
Note: Do not hang up or call will be dropped.
To return to held call 1 Press [ Flash ] twice
To put call 1 on hold
1 Press [ Flash ]
[recall dial tone]
and place call 2
●
Call 1 is put on hold
2 Dial call 2 (or another feature)
To put call 2 on hold
1 Press [ Flash ]
[recall dial tone]
and return to call 1
●
Call 2 is put on hold
2 Press [ Flash ] twice
●
Call 1 is reconnected
To complete call 2
1 After party on call 2 hangs up, press [ Flash ] twice
and return to call 1
●
Call 1 is reconnected
29