Algolith C3012-8001-200 - Manual (Page 22)

Flea
22
Technical T
utorial
Adjusting 2D Spatial Filtering
„ Generally, 2D Spatial Filtering should be set to high values to remove mosquito noise.
A good setting is higher than 8. However, reducing mosquito noise using the 2D Spatial
Filter shouldn’t be so high as to blur image detail.
2D spatial filtering with proper settings.
„ Too low a value of 2D filtering is likely to leave some mosquito noise in your image.
Low filtering (residual noise).
(Continued on next page).