Arcam CD33 - Manual (Page 7)

6 7
Technical specifications
NOTE: All specification values are typical unless otherwise stated.
WORLDWIDE GUARANTEE
This entitles you to have the unit repaired free of charge, during the
first two years after purchase, at any authorised Arcam distributor
provided that it was originally purchased from an authorised Arcam
dealer or distributor. The manufacturer can take no responsibility for
defects arising from accident, misuse, abuse, wear and tear, neglect
or through unauthorised adjustment and/or repair, neither can they
accept responsibility for damage or loss occurring during transit to or
from the person claiming under the guarantee.
THE WARRANTY COVERS:
Parts and labour costs for two years from the purchase date. After two
years you must pay for both parts and labour costs.
The warranty
does not cover transportation costs at any time.
CLAIMS UNDER GUARANTEE
This equipment should be packed in the original packing and returned
to the dealer from whom it was purchased, or failing this, directly
to the Arcam distributor in the country of residence. It should be
sent carriage prepaid by a reputable carrier -– NOT by post. No
responsibility can be accepted for the unit whilst in transit to the
dealer or distributor and customers are therefore advised to insure
the unit against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department,
Pembroke Avenue, Waterbeach, CAMBRIDGE, CB5 9QR, England
Telephone: +44 (0)1223 203203
Fax:
+44 (0)1223 863384
Email: [email protected]
PROBLEMS?
Always contact your dealer in the first instance.
If your dealer is unable to answer any query regarding this or any other
Arcam product please contact Arcam Customer Support on +44 (0)
1223 203203 or write to us at the above address and we will do our
best to help you.
ON LINE REGISTRATION
You can register your Arcam product on line at:
www.arcam.co.uk
Guarantee
CONTINUAL IMPROVEMENT POLICY
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
RADIO INTERFERENCE
The FMJ CD player is a digital audio device which has been designed
to very high standards of electromagnetic compatibility. CD players
generate, and can radiate RF (radio frequency) energy. In some cases
this can cause interference with FM and AM radio reception. If this is
the case, keep the CD player and its connecting cables as far from the
tuner and its aerials as possible. Connecting the CD player and the
tuner to different mains sockets can also help to reduce interference.
EC COUNTRIES -– These products have been designed to comply
with directive 89/336/EEC.
USA – These products comply with FCC requirements.
LASER RADIATION
If an Arcam CD player is operated whilst the outer casing is removed,
invisible laser radiation could cause eye damage.
Digital to Analogue conversion
High performance 192kHz 24-bit sample rate converter and
multiple 24-bit digital to analogue conversion
Laser pick-up
3 beam
Laser wavelength 780nm
Numerical aperture 0.45
Dynamic range (unweighted) >93dB *
Signal to noise ratio 113dB
Harmonic distortion (0dB, 1kHz) <0.003% *
Frequency response (±0.2dB) 10Hz–20kHz
Output level (0dB) 2.2Vrms
Output impedance 50Ω
Minimum recommended load 5kΩ
* Using 16-bit, triangular p.d.f. dithered data
Physical
Dimensions
W430 x D290 x H85mm
Weight 6.5kg nett/8.4kg packed
Power consumption 32VA maximum
Digital output connection 75Ω co-axial
optical TOSLINK
Supplied accessories
Mains lead
CR-314 remote control
2 x AAA batteries
E&OE