WeatherTech FloorLiner DigitalFit User Manual
WeatherTech For the car
Quality - WeatherTech
®
FloorLiners
™
and
All-Weather Floor Mats have undergone the
most rigorous testing and quality control
measures, ensuring you superior quality and
the longest lasting, highest performing product
of its type.
Recyclable - WeatherTech
®
FloorLiners
™
and
All-Weather Floor Mats are manufactured from
an engineered resin called Thermoplastic Rubber.
Our FloorLiners
™
or All-Weather Floor Mats are
100% recyclable and free of any Cadmium, Lead,
Latex or PVC’s. All of our packaging is recyclable
as well.
Care - Regular cleaning extends the life of your
FloorLiners
™
or All-Weather Floor Mats. The
FloorLiners
™
or All-Weather Floor Mats should
be removed and shaken regularly to remove loose
debris. Clean the FloorLiners
™
or All-Weather
Floor Mats using only a mild detergent soap and
water. Do not use harsh chemicals or abrasive
type cleaners as these products may damage the
FloorLiners
™
or All-Weather Floor Mats. We do not
recommend the use of Armor-All
®
, Son-of-a-Gun
®
or any other silicone-based surface treatment, as
this will make the surface slippery.
Installation Instructions -
1) ReMOVe ALL OTheR FLOOR MATS FROM
The VehiCLe.
2) Select the correct WeatherTech
®
FloorLiner
™
or All-Weather Floor Mat for the appropriate
floor location of the vehicle. in most
applications, LhS (Left hand Side) or RhS
(Right hand Side) is molded into the underside
of the floor mat adjacent to the part number
(W102-LhS, for example), and the FloorLiners
™
will only fit the correct side of the vehicle. The
retention hook bosses, hook holes or retention
grommets (if equipped) are located towards
the rear or bottom portion of the FloorLiner
™
or All-Weather Floor Mat, near the seat rails.
3) Please ensure that you have either the
factory supplied retention hooks installed in
the floor (where applicable), or install the
specific supplied hooks that came with the
WeatherTech
®
FloorLiners
™
or All-Weather
Floor Mats or if equipped, utilize the supplied
retention grommets or anchors.
4) install the LhS (driver’s side) FloorLiner
™
or
All-Weather Floor Mat on the driver’s side of
the vehicle. insert the retention hooks or
engage the retention grommets (if applicable).
Pull the FloorLiner
™
or All-Weather Floor Mat
forward to make sure that the retention hooks
or retention grommets are engaged and that
the mat is securely fastened to the floor. if you
are unable to fully insert the retention hooks
into and through the hook holes, or unable
to engage the retention grommets (where
applicable), do not use the FloorLiners
™
or
All-Weather Floor Mats in the vehicle. Once
the LhS (Left hand Side) FloorLiner
™
or
All-Weather Floor Mat is properly and securely
installed, install the RhS (Right hand Side)
FloorLiner
™
or All-Weather Floor Mat in
the passenger side of the vehicle and the
rear FloorLiner
™
or All-Weather Floor Mats,
if applicable.
5) Move the accelerator, brake and clutch pedals
(if applicable) through their full range of
motion to confirm there is no interference with
the FloorLiner
™
or All-Weather Floor Mat.
FAILURE TO CORRECTLY INSTALL
OR RE-INSTALL THE FLOORLINER
™
OR
ALL-WEATHER FLOOR MATS ACCORDING
TO THE ABOVE INSTRUCTIONS COULD
RESULT IN THE LOSS OF CONTROL OF
THE VEHICLE AND DEATH OR SERIOUS
INJURY.
67FLFMINS1
© 2011 by MacNeil IP LLC
PLEASE - Place this warning in your owner’s manual
Specialists in Original Equipment and
Aftermarket Automotive Accessories
1 MacNeil Court • Bolingbrook, IL 60440
800-441-6287 • 630-769-1500 • fax 630-769-0300
Proudly Designed,
Engineered and
Manufactured
in the USA
RECYCLABLE
.com