Kramer Electronics SP-14 - Manual (Page 8)

7
Setting Scaler Functions
Default Settings
The SP-14 comes with default setting that should give good results on most content but you do need
to decide on some parameters for your application. As you get used to the unit you can be more
adventurous
Input resolution and frame rate
The input resolution and frame rate is recognised automatically and displayed on top line of the
status menu screen
IN: 1920x1080i @50.00 Hz 3G-SDI 1
OUT:1920x1080i @59.94 Hz Free Run Mode
Unlocked Keypad Preset 1
3G-SDI 1 C-YPbPr HDMI Test Pat
In this example the input is 1920x1080P at 50Hz from the 3G-SDI input 1
Set Processor Output Resolution and Frame Rate
Set the processor output resolution and frame rate you require in the Output Settings menu
Using the up and down arrow keys move Output Settings to the top of the window and press select
[Output Settings ]↑
Audio
Closed Captioning
Information
Using the up and down arrow keys move Output Format to the top of the window and press select
[Output Format 1080i50]↑
Arc Mode Side Panels/Ltrbox 25%
Arc Custom N/A
Process Mode Full Processing ↓
Press select, use the left and right arrow keys to choose the output format, press select
Output Format > 1080i50<
Arc Mode
Arc Custom
Process Mode