Kramer Electronics SP-14 - Manual (Page 10)

9
Set ARC Mode
If you are converting the Aspect Ratio of the picture there are pre-set modes to choose from or a
custom mode, if you choose Custom Mode then you will also need to set the ARC Custom on the
next line of the menu
Using the up and down arrow keys move Output Settings to the top of the window and press select
[Output Settings ]↑
Audio
Closed Captioning
Information
Using the up and down arrow keys move Arc Mode to the top of the window and press select
[Arc Mode Side Panels/Ltrbox 25%]↑
Arc Custom N/A
Process Mode Full Processing
3G-SDI Data Map 10bit 4:2:2 YCbCr ↓
Press select, use the left and right arrow keys to choose the Arc Mode, press select
Arc Mode > Panels/Ltrbox 25% <
Arc Custom
Process Mode
3G-SDI Data Map