Kramer Electronics FC-332 - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the FC-332
6
5 Connecting the FC-332
To connect the FC-332, as the example in Figure 2 illustrates, do the
following 1
1. Connect the SD/HD-SDI IN connector to a digital video source (for
example, a digital video player).
:
2. Connect the SD/HD-SDI LOOP connector to a digital acceptor (for
example, a digital display).
3. Connect the HDMI 1 connector to an HDMI acceptor (for example, a
plasma display).
4. Connect the HDMI 2 connector to an HDMI acceptor (for example, a
plasma display).
5. Using a small screwdriver, turn the SDI AUDIO GROUP SELECT rotary
switch to select an SDI stereo channel 2
6. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in
from 0 to 7.
Figure 2).
1 Switch OFF the power on each device before connecting it to your FC-332. After connecting your FC-332, switch on its
power and then switch on the power on each device
2 SDI audio is made up of 16 channels of audio information or 8 stereo pairs. Whereas most other devices access a group of
2-pairs, the FC-332 accesses a single pair out of a group for higher discrimination