Kramer Electronics FC-322 - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the FC-322
6
Table 1: FC-322 SD/HD-SDI to HDMI Converter/Switcher/DA Features
# Feature Function
1 SD/HD-SDI IN 1 BNC Connector Connects to the SD or HD-SDI source 1
2 SD/HD-SDI IN 2 BNC Connector Connects to the SD or HD-SDI source 2
3 HDMI OUT 1 Connector Connects to the HDMI 1 acceptor
4 SDI AUDIO GROUP SELECT Turn to select the SDI input stereo channel (0 to 7)
5 HDMI OUT 2 Connector Connects to the HDMI 2 acceptor
6 5V DC +5V DC connector for powering the unit
7 REMOTE IR Sensor Receives the input from an IR remote control
8 REMOTE IR LED Flashes red when receiving an IR signal
9 IN SELECT Pushbutton Press to toggle between SDI 1 IN and SDI 2 IN
10 SDI 1 IN LED Illuminates green for an SD input signal and blue for an HD
input signal on HD-SDI 1
11 OUT 1 LED Illuminates green to indicate that display 1 is connected
12 SDI 2 IN LED Illuminates green for an SD input signal and blue for an HD
input signal on HD-SDI 2
13 OUT 2 LED Illuminates green to indicate that display 2 is connected
14 ON LED Illuminates green when receiving power
5 Connecting the FC-322
To connect the FC-322, as the example in Figure 2 illustrates, do the
following 1
1. Connect a digital video source (for example, a digital video player) to the
SD/HD-SDI IN 1 connector.
:
2. Connect a digital video source (for example, a digital video player) to the
SD/HD-SDI IN 2 connector.
3. Connect the HDMI 1 connector to an HDMI acceptor (for example, a
plasma display).
4. Connect the HDMI 2 connector to an HDMI acceptor (for example, a
plasma display).
5. Using a small screwdriver, turn the SDI AUDIO GROUP SELECT rotary
switch to select an SDI stereo channel 2
6. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in
from 0 to 7.
Figure 2).
1 Switch OFF the power on each device before connecting it to your FC-322. After connecting your FC-322, switch on its
power and then switch on the power on each device
2 SDI audio is made up of 16 channels of audio information or 8 stereo pairs. Whereas most other devices access a group of
2-pairs, the FC-322 accesses a single pair out of a group for higher discrimination