Kramer Electronics FC-113 - Manual (Page 7)

Connecting the FC-113 HDMI to SD/HD-SDI Converter
5
5 Connecting the FC-113 HDMI to SD/HD-SDI Converter
To connect
1
the FC-113, as illustrated in Figure 2 :
1. Connect an HDMI source (for example, a video camera) to the HDMI
IN connector.
2. Connect the SD/HD-SDI OUT 1 connector to an acceptor (for example,
a non-linear editor).
3. Connect the SD/HD-SDI OUT 2 connector to a digital display.
4. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 2 ).
Figure 2: Connecting the FC-113 HDMI to SD/HD-SDI Converter
1 Switch off the power on each device before connecting it to your FC-113. After connecting your FC-113, switch on its
power and then switch on the power on each device