Kramer Electronics FC-113 - Manual (Page 5)

Overview
3
The FC-113 features:

One HDMI input

Two SD/HD-SDI/3G HD-SDI outputs on BNC connectors

HDTV compatibility

Active LED indicators on the front panel. Green indicates a standard
(SDI) definition and blue indicates a (HD-SDI) high-definition input
signal

5V DC power

Medical equipment compliance
3.1 Recommendations for Best Performance
To achieve the best performance:

Use only good quality connection cables
1
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer FC-113
away from moisture, excessive sunlight and dust
3.2 Accessory to Medical Equipment (IEC 60601-1)
In the modern medical environment remote access is essential, for example,
to transfer clinical data between doctors and to train to medical students.
The FC-113 is certified according to the IEC 60601-1-2, Clause 2.1.3,
Medical Electrical Equipment, Part 1: General Requirements for EMC
standard which is required when accessory devices are used at locations
where medical personnel and patients are present.
The FC-113 constitutes an optional component that can be considered
necessary and suitable as part of medical equipment or for use as part of a
medical system to provide real time simultaneous video feeds to those
present at the local medical environment and at remote locations. In this
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com