Kramer Electronics SL-12 - Manual (Page 11)

8 SL-12 - Connecting the SL-12
5. Connect the RS-232 ports as follows:
 Connect RS-232 port 1 to the projector
 Connect RS-232 port 3 to the plasma display
6. Connect the RS-485 to several Kramer matrices, for example (not shown in
Figure 2 ).
7. Connect the Ethernet port to a network.
8. Connect the K-NET port to any RC device with K-NET.
Figure 2: Connecting the SL-12 Master Room Controller