Kramer Electronics RC-8RKL - Manual (Page 9)

Using Your Universal Room Controller
7
5 Using Your Universal Room Controller 1
This user manual is applicable once the unit is installed and configured 2 . The
installation process is not detailed in this user manual 3 , and includes:
Setting up the labels on the buttons, according to your specific
requirements 4
Hardware installation
Connecting the inputs and the display
Configuration via the Windows®-based configuration software and/or
the IR learner
The universal room controller is very easy to use, as the example in Figure 6
and Table 6 defines 5 :
1 From this section on, all the information is relevant to the RC-8RK and RC-8RKL units, unless noted otherwise
2 By authorized Kramer technical personnel or by an external system integrator
3 Refer to the separate online “RC Configuration and Installation Guide” at http://www.kramerelectronics.com
4 It is recommended to place labels on the buttons prior to installing the unit, as this involves removing the face plate
5 Your RC-8RK/RC-8RKL was installed and configured to suit your specific requirements. This example describes how to
setup one of an unlimited number of available setups for the system