Kramer Electronics VP-790 - Manual (Page 15)

VP-790 Blending Images – Warp Adjustment 13
4. Resample the grid to start with a grid mesh of nine points.
Figure 14: Setting a Grid Mesh of Nine Points
5. Check the Mirror and Snap boxes in the Evaluator Control window to turn
them off.
6. Adjust the position of the nodes with either the mouse or the arrow keys to a
position that will bring the test pattern correctly onto your screen.
7. Click the SEND button and wait for the result to be seen on the screen and
the comment Warp Success to appear in the Send Warp area.
Figure 15: Setting the Warp