Kramer Electronics VP-774AMP - Manual (Page 50)

VP-774AMP - The Display Modes 45
45
7 The Display Modes
The VP-774AMP can function in the single window display mode (the factory
default setup) or the dual window display mode.
7.1 The Single Window Display Mode
The single window mode shows one window on the screen. The window size can
be customized, and its parameters modified via the OSD menu.
7.1.1 Activating the Single Window Mode
Set the VP-774AMP to the single window display mode in any of the following
ways:

Press and hold (for 3 seconds) the illuminated front panel PIP button until
the button no longer illuminates

Access the OSD menu, select INPUT>Display Mode, and then choose
Single Window

Access the Web pages (see Section 8.3 )

Press the PIP window on the remote control transmitter (see Section
8.4
)
7.2 The Dual Window Display Mode
The VP-774AMP dual window mode feature lets you show two images on one
screen: the main window and the PiP window. For example, you can show a live
video window on top of a graphic background, or show two images on screen of the
same input channel. The PiP window appears even if no input signals are
connected. In this case the PiP window appears in dark gray and the main window
appears in light gray.