Kramer Electronics VP-773 - Manual (Page 18)

VP-773 - Connecting the VP-773 13
13
6. Connect the HDMI 1 OUT connector to an HDMI acceptor (for example, a
plasma display).
You can also connect the HDMI OUT 2 output (not shown in Figure 4 )
7. Connect the HDBT RJ-45 connector to a receiver (for example, the Kramer
TP-580Rxr).
8. Connect the AUDIO LINE OUT Terminal Block connector to a balanced
audio acceptor and the S/PDIF OUT RCA connector to a digital audio
acceptor (not shown in Figure 4 ).
9. If required, you can connect a PC and/or controller to the:

RS-232 terminal block (see Section
8.3.2
)

Ethernet connector (see Section
8.3.3
)
10. Connect the power cord (not shown in Figure 4 ).