Kramer Electronics VP-725N - Manual (Page 3)

Connecting to the Kramer Device via the Ethernet Port 1
1 Connecting to the Kramer Device via the
Ethernet Port
You can connect the Kramer machine via the Ethernet in the following ways:

For direct connection to the PC, use a crossover cable (see Section ‎1.1 )

For connection via a network hub or network router, use a straight-through
cable (see Section ‎1.2 )
1.1 Connecting the Ethernet Port Directly to a PC
(Crossover Cable)
You can connect the Ethernet port of the Kramer machine to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory
default IP address of the Kramer machine during the initial
configuration.
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click the relevant Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click Properties (see
Figure 1 ).
i