Kramer Electronics VP-200xl - Manual (Page 9)

KRAMER ELECTRONICS LTD. 8
5 INSTALLATION
5.1 Rack Mounting
The VP-200xl distributor may be rackmounted in a standard 19” (1U or 3U) EIA
rack assembly, using either the RK-T1 optional adapter (1U rack space - for
mounting up to three machines) or the RK-T3 optional adapter (3U rack space
for mounting up to eight machines).
5.2 Connecting TO VGA/XGA Devices
VGA/XGA sources and output devices (such as monitors, projectors or recorders)
may be connected to the distributor through the HD 15F connectors located on
the back of the unit.
6 USING THE DISTRIBUTOR
6.1 Typical Application
A typical application is described in figure 2 below.
Figure 2: A typical application of the VP-200xl