Kramer Electronics VP-111K - Manual (Page 5)

Overview
3
3 Overview
The high-performance Kramer VP-111K is a line driver for signals
exceeding UXGA. It accepts one input, provides correct buffering and
isolation, and outputs the amplified and equalized signal to a remote
acceptor. It also loops the input signal to a local monitor (or some other
acceptor).
The
VP-111K features:
High bandwidth (500MHz) that drives very long high-resolution
lines 1 ensuring transparency even at highest resolution
A TERM switch for input signal termination
KR-ISP™ Advanced Sync Processing that ensures compatibility
with a wide range of computers (even if the sync level is too low)
by restoring the sync signal waveform
To achieve the best performance:
Use only good quality connection cables 2 to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VP-111K away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 3 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Up to 100 meters (300ft) when using good quality cable
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
3 For example, part number 2535-052002