7 switches and jumpers – Asus P4S333 User Manual
Page 39
ASUS P4S333 motherboard user guide
2-17
2.7
Switches and jumpers
The motherboard frequency is adjusted through the DIP switches. The
white block represents the switch position. The illustration below shows all
the switches in the OFF position.
The JEN jumper is set in conjunction with the DIP switches. In
JumperFree mode, set all the DIP switches to OFF.
1. JumperFree™ mode (JEN1)
This jumper allows you to enable or disable the JumperFree™ mode.
The JumperFree mode allows you to change CPU settings through the
BIOS setup instead of using the DIP switches.
The JEN jumper must be set to pins 1-2 (jumper mode) if you wish to
use the DIP switches. Otherwise, setting the switches does not
produce any effect.
P4S333
®
P4S333 DIP Switches
DSW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection
ON
OFF
ON
12345
P4S333
®
P4S333 JumperFree™ Mode Setting
JEN1
Jumper Free
(Default)
Jumper Mode
DSW1
ON
12345
ON
OFF
2
3
1
2