Dionic 90 battery specifications – Anton/Bauer DIONIC 90 User Manual
Page 17

15
DIONIC 90 BATTERY SPECIFICATIONS
OUTPUT VOLTAGE
14.4v Nominal
12.4 ~ 16.8v
Operating
CAPACITY
(CELL CAPACITY)
90 WH Nominal
(6.3 AH Rated)
FUSE
Internal 8amp
RECOMMENDED OPERATION
15 - 50 watts
1
(MAXIMUM DISCHARGE RATE)
(90 watts)
2
TYPICAL RUN-TIME
@ 20w - 4 ½ hrs.
@ 25w - 3 ½ hrs.
@ 40w - 2 ¼ hrs.
WEIGHT
1.7 lbs
SIZE
5
1/4
x 3
1/2
x 2
1/8
CHARGE TEMPERATURE
0 – 40°C
DISCHARGE TEMPERATURE
-20 – 60°C
STORAGE TEMPERATURE
-20 – 50°C
1
DIONIC 90 may be used to power both camera and on camera light
however its maximum cold halogen lighting load is restricted to 50 watts.
2
Routine use of a battery at discharge rates greater than the recommended
operating range can reduce overall service life. Always select the proper
size battery for your application.