Warranty, Replacement items – Graymills Bed Filter OMI User Manual
Page 4
WARRANTY
3705 N Lincoln Avenue Chicago, IL 60613
773-248-6825 fax 773-477-8673
[email protected] www.graymills.com
© 2013 Graymills Corporation
The information contained in this manual is intended to be accurate. However, the manufacturer retains the right to make changes in design which may not be included herein.
795-92645 03-13 Bed Filter/Magnetic Separator OMI
REPLACEMENT ITEMS
Part Number
Description
785-90521
25W Gear Motor for BFST40/80, MS40/80
785-90522
40W Gear Motor for BFST120, MS120
785-92808
40W Gear Motor for BFST160, MS160
785-90041
10X Reducing Gear for BFST40/80, MS40/80
785-90042
90X Reducing Gear for BFST40/80, MS40/80
785-09821
Float Switch, all models
742-90152
20 micron Filter Paper, 19.5” wide,150 yd roll
742-92694
20 micron Filter Paper, 28” wide,150 yd roll
MODEL
VOLTAGE
INLET/
OUTLET
A
(in.)
B
(in.)
C
(in.)
D
(in.)
MS40
230, 460V/3Ph 2” / 2”
13
5
⁄
8
18
1
⁄
4
11
7
⁄
8
8
MS80
230, 460V/3Ph 2” / 2
1
⁄
2
”
17
1
⁄
2
18
1
⁄
4
11
7
1
⁄
4
MS120
230, 460V/3Ph 3” / 3”
18
5
⁄
8
19
12
3
⁄
8
8
5
⁄
8
MS160
230, 460V/3Ph 3” / 3”
22
19
12
3
⁄
8
8
5
⁄
8
Part Number
Description
IMV08-F
Pump for BFTS40
IMV25-F
Pump for BFTS80
IMV50-F
Pump for BFTS120
IMV75-F
Pump for BFTS160
785-09905
Replacement Mesh Chain for BFST40
785-90406
Replacement Mesh Chain for BFST80
785-92806
Replacement Mesh Chain for BFST120
785-92807
Replacement Mesh Chain for BFST160
Graymills Corporation
warrants that the equipment manufactured and
delivered hereunder, when properly installed and maintained, shall be free
from defects in workmanship and will function as quoted in the published
specification. Graymills does not warrant process performance nor does
Graymills assume liability for equipment selection, adaption or installation.
This warranty does not apply to damages or defects caused by operator
carelessness, misuse, abuse, improper application, or abnormal use; the use
of add-on parts or equipment which damages or impairs the proper function
of the unit and modifications made by Buyer.
Graymills’
obligation under this Warranty shall be limited to:
• Replacing or repairing (at Graymills’ sole discretion) any non-conforming
or defective parts manufactured by Graymills within
one year from the date of shipment to customer.
• Replacing or repairing (at Graymills’ sole discretion) thermoplastic parts
cleaner tanks or lids that have cracked or split under normal use within
five (5) years from date of shipment.
• Replacing or repairing components supplied but not manufactured by
Graymills
to the extent of the warranty given by the original manufacturer.
Buyer must give Graymills prompt notice of any defect or failure and
satisfactory proof thereof.
This warranty does not apply to expendable parts which need periodic
replacement due to normal wear.
This warranty does not apply to rusting of mild steel components or tanks in
product used with aqueous (water based) fluids.
A new warranty period shall not be established for repaired or replaced
materials or products. Such items shall remain under warranty for only the
remainder of the warranty period of the original materials or products.
If you believe you have a warranty claim, contact Graymills at
773-248-6825 for a Return Merchandise Authorization number. Any
returned material must have its RMA number on the outside of the package
and be shipped prepaid or the shipment will be refused. Graymills will
promptly examine the material and determine if it is defective and within the
warranty period.
ThE FOREGOING wARRANTIES ARE IN LIEU OF ALL OThER wARRANTIES
whEThER ORAL, wRITTEN, EXPRESSED, IMPLIED OR STATUTORy.
IMPLIED wARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERChANTABILITy ShALL NOT APPLy. Graymills’ warranty obligations and
Buyer’s remedies thereunder (except as to title) are solely and exclusively as
stated herein. In no case will Graymills be liable for consequential damages,
loss of production or any other loss incurred because of interruption of
service.
SPECIFICATIONS — MAGNETIC SEPARATOR
SPECIFICATIONS — BED FILTER
MODEL
FILTRATION
CAPACITY
TANK
CAPACITY
VOLTAGE
HP
FILTER
PAPER
MAX
FLOW
PUMP
OUTLET
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
BFTS40
10 GPM
31 Gal
230, 460V/3Ph
1/10
19
1
⁄
2
” w
10 GPM
1/2”
26
7
⁄
8
47
1
⁄
4
26
15
3
⁄
4
39
3
⁄
8
BFTS80
20 GPM
41 Gal
230, 460V/3Ph
1/4
19
1
⁄
2
” w
20 GPM
3/4”
26
7
⁄
8
59
26
15
3
⁄
4
51
1
⁄
8
BFTS120
30 GPM
54 Gal
230, 460V/3Ph
1/2
28” w
30 GPM
3/4”
36
1
⁄
4
59
29
1
⁄
8
15
3
⁄
4
51
1
⁄
8
BFTS160
40 GPM
67 Gal
230, 460V/3Ph
3/4
28” w
40 GPM
1”
36
1
⁄
4
71
29
1
⁄
8
15
3
⁄
4
63