Graymills PQL Sealed Bearing Change User Manual
Graymills

795-40615
0409
Graymills
PQL Sealed Bearing Housing Change
Please follow the instructions below
1. Tools required:
• 5/32”
Hex
Key
• Hammer
• End Nipper Pliers
• Vise (Not Pictured)
2. Remove head from PQL-DV-DH
3. Remove outer housing by removing the three
attachment screws. Set housing and screws
aside.
4. Remove screws attaching Q-collar with a 5/32”
hex key wrench. Set screws and collar aside.
Graymills Corporation – 3705 N. Lincoln Ave. – Chicago, IL 60613 – Phone-773.477.4100 – Fax-773.477.4133 – www.graymills.com