Audiovox FD-250 - Manual (Page 3)

-
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the Menu button
3
once
so the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass
mode, press the or side of the Level control
2
to adjust the bass response
as desired. The level will be shown by the bars on the display panel from a minimum of
to a maximum of (the diamond in the center
of the display represents flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing the Select button
3
twice
so the “TRE” indication appears on the display panel. Within 5 seconds of choosing the Treble
mode, press the or side of the Level control
2
to adjust the treble response
as desired. The treble level will be shown by the bars on the display panel from a minimum
of
to a maximum of (the diamond in the center
of the display represents flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode by pressing the Select
button
3
three times so the “BAL” indication appears on the display panel. Within 5 seconds
of choosing the Balance mode, press the side of the Level control
2
to adjust the
stereo balance to the left channel speakers or the side of the control to adjust it to the
right channel speakers. The balance position will be shown by the bars on the display panel
from L
R (full left) to L R (full right). When the
volume level between the left and right speakers is equal, L R will be
shown on the display panel. The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select
button
3
four times so the “FAd” indication appears on the display panel. Within 5 seconds
of choosing the Fader mode, press the or side of the Level control
2
to adjust
the front-rear speaker levels as desired. The fader position will be shown by the bars on the
display panel from F
R (full front) to F R (full rear).
When the volume level between the front & rear speakers is equal, F R
will be shown on the display panel. The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another function is activated.
8
AM/FM BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication “AM”, “FM1”, or
“FM2” will appear on the display panel according to your selection.
9
MANUAL UP/DOWN TUNING ( TUNE )
AUTOMATIC SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning ( ) side of the button
to advance the unit one digit higher or the Down Tuning ( ) side of the button to tune
downward. Continue to press either side of the button to tune the radio rapidly in the selected
direction.
Pressing either side of the button for longer than 0.5 seconds and then releasing will activate
the Automatic Seek Tuning function in the selected direction. The radio will seek the next
available station and stop at that frequency. The Seek function can be stopped by pressing
the button again or activating any other tuning function.
-
-
- -
-2-
-
-
-