Closing the server – Apple Xserve (Blower Replacement) User Manual

Page 5

Xserve Blower -

Closing the Server

Carefully slide the bottom housing back into the rack.

Tighten the front thumb screws to secure it.

Warning: Never turn on the server unless all of its internal and external parts

are in place and it is closed. Operating the server when it is open or missing

parts can damage it or cause injury.

Apple Computer, Inc.

This document is protected under U.S. Copyright Law and International Treaties, and no

part of this document may be reproduced in any form without written permission from

Apple.

Apple is not responsible for typographical, printing, or inadvertent errors.

Apple Computer, Inc.

1 Infinite Loop

Cupertino, CA 95014-2084

USA

+ 1 408 996 1010

http://www.apple.com

Apple, the Apple logo, Mac, Macintosh, and the Mac logo are trademarks of Apple

Computer, Inc., registered in the U.S. and other countries. Xserve is a trademark of Apple

Computer, Inc.