Silverline 160A Inverter Arc Welder - Manual (Page 9)

8
GB
Maintenance
WARNING: Always remove the plug from the mains power supply before
carrying out any maintenance/cleaning.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal
parts to wear quickly, shortening the machine’s service life. Clean the
body of your machine with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
• If the mains cable becomes damaged or worn it must be replaced by a
qualified technician with a cable equal or superior in current capacity to
the original fitted cable
• If the internal fuse blows it must be replaced with a fuse of exactly
the same type and rating as originally fitted. If the replacement fuse
blows immediately it is likely to indicate a fault condition and a service
technician should be consulted immediately
Disposal
Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of power tools
103047_Z1MANPRO1.indd 8 05/02/2013 15:21