beautypg.com

Step 3: checking the internet connection – Abocom M73-APO07-300 User Manual

Page 2

background image

- 2-

service that runs PPPoE. If your xDSL
service uses PPPoE, after installing the
Wireless router, do not run PPPoE
software on your computers.

Static configuration

Select this item when the ISP assigns
static IP address for your account.

4. When finished, click Wireless in the left pane for Wireless LAN settings.

Wireless Configuration

SSID

You have to assign an SSID for identification.

Channel No.

You have to select a Channel No as the Channel ID for
identification too.

Basic Rate

Set to 1,2 Mbps by default.

STEP 3: CHECKING THE INTERNET CONNECTION
• To see if the IP Sharing device is visible on the local network, go to Start ÆRun “PING

192.168.1.254”

• To check if this IP Sharing device is connected to the Internet, run “PING 168.95.192.1 – w

3000”.

• Run a web browser to surf the Internet.