Problem possible cause solution, Troubleshooting – Silverline Suction Feed Undercoat Gun User Manual
Page 9

8
GB
Problem
Possible Cause
Solution
Faulty spray
Improper cleaning resulting in dried materials
around fluid nozzle tip or in air nozzle
Soak in suitable solvent to soften the dried material; remove with a soft
brush or cloth
Damaged air or fluid nozzles
Replace faulty parts
Incompatible fluid viscosity
Check fluid viscosity and dilute with solvent where appropriate
Air leak
Check all fittings and hose for air leaks and correct issue by re-
tightening, using PTFE tape or replacing
Intermittent/sputtering spray
Insufficient fluids available
Refill fluid supply
Nozzle not tightened sufficiently
Tighten nozzle
Incorrect air pressure
Check and correct air pressure
If the above troubleshooting solutions fail, contact your dealer or an authorised Silverline service centre.
Troubleshooting
675130_Z1MANPRO1.indd 8
05/07/2013 11:36