Rear panel, Made in china – Australian Monitor XDS Series User Manual
Page 5
Made in China
SN:
XDS212
Dual 12” Subwoofer
Frequency Response (-3dB)
50Hz–180Hz
Sensitivity (dB 1W 1M)
99 dB
Impedance
8 Ohm
Recommended Max Power (Program)
600W
XDS10
2 Way Full Range Speaker
Made in China
SN:
1
Speaker Input
Speaker inputs are via a pair of 4pole twist lock connectors (Neutrik speakON or
compatible) wired in parallel.
The twist lock connectors are wired using pins 1+ and 1- only, with both
connectors wired in parallel. Either connector may be used as the input with the
other used as a loop through connector.
2
Handle
A single recessed carry handle.
1
Speaker Input
Speaker inputs are via a pair of 4pole twist lock connectors (Neutrik speakON or
compatible) wired in parallel.
The twist lock connectors are wired using pins 1+ and 1- only, with both
connectors wired in parallel. Either connector may be used as the input with the
other used as a loop through connector.
1
XDS10 shown here
1
XDS212 shown here
2
PAGE 5
XDS SERIES INSTALLATION AND OPERATION MANUAL
REAR PANEL