Airlink101 AWLC6070 - Manual (Page 29)

29
Open the Wireless Monitor.
Click on Profile Setting, then click on New.
The profile settings box will appear.
First change the network type to Adhoc. (Infrastructure is for when you are using a
router).
Enter a profile name into the Profile Name box so that you can identify the profile.
Type in a network name (SSID) into the SSID box
Select your desired Channel
You can also choose between no security or WEP security. If you choose WEP security,
you can follow the instructions in the Configuring Encryption section of the manual.
Click OK to save the profile.