Mounting & accessories – Australian Monitor XRS Manual User Manual

Page 7

PAGE 7

XRS SERIES INSTALLATION AND OPERATION MANUAL

MOUNTING & ACCESSORIES

MOUNTING

When mounting XRS series loudspeakers the following safety issues must be considered;

1. The mounting of a permanently installed speaker may be dangerous unless undertaken

by a qualiﬁﬁed professional with relevant experience.

2. Walls and mounting surfaces must be capable of supporting the speaker and bracketry

in a safe and secure manner.

3. Fixings must be safely attached to the speaker cabinet and the mounting surface. All ﬁxings

must be installed in accordance with the manufacturer’s instructions and speciﬁcations.

Suspending with Eyebolts

The XRS range of speaker cabinets provide a number of secured mounting points for use with M8 eye bolts.

As many eyebolt locations as possible should be used on the speaker. When mounting an XRS6ODV or XRS8
speaker cabinet, at least two or more mounting points must be used. For the XRS10 and XRS12 speaker
cabinets, three or more points must be used. The best way to hang a speaker using eyebolts is to use two
eyebolts on the top of the cabinet and one on the rear to give the speaker some angle.

All eyebolt ﬁttings in the XRS range are M8 and require at least a 20 mm of thread length.

ACCESSORIES

XRS6ODV

XR6PMA

Pole mount adaptor

XR6UMB

Universal mount bracket

XRS6UB

U bracket

XRS8

XR8PMA

Pole mount adapter

XR8UMB

Universal mounting bracket

XRS10

XR10CVR

Heavy duty cover

AMISLSB1

Wall mount brackets

ATC303

Tripod speaker stand

ATC304

Heavy duty tripod speaker stand

ATC305

Winch up speaker stand

XR10-12UB

Universal bracket

XRS12

XR12CVR