Australian Monitor VGA14 - Manual (Page 6)

O P E R AT I O N
PAG E 6 VG A 1 4 I N S TA L L AT I O N & O P E R AT I O N M A N UA L
Before making any connections to the VGA14,
observe the following:
> Ensure the mains voltage supply matches the label on the
supplied plug-pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a
common point. Avoid powering equipment within a system
from multiple power sources that may be separated by large
distances
OPERATION
> Connect all video sources and destination equipment
> Power up the VGA14 video distribution amplifier
> Power up all source and destination audio-visual sources
VGA14 Manual (A5).indd 6 12/3/07 2:24:14 PM