Australian Monitor SY800 - Manual (Page 22)

22 Specifications
Model:
@ 4 ohms 0.1% THD
Single channel driven 130
All channels driven 6 x 125W
(2 ohm loads not recommended)
Bridge mode
8 ohm load
2 x 250W
(4 ohm bridging not recommended)
22.3
@ 1kHz <0.030 ohms
(@ 1kH re 8 ohms) > 250:1
>40 V/µs
@ 1KHz
Rated Power into 4 ohms (-3dB)
SY6125
Output Power
Voltage Gain
Output Impedance
Damping factor
Slew rate
Per Channel
W
15 Hz- 80 kHz
H,W,D = (87 x 482x450) mm
Shipping Weight = 17 Kg
Frequency response
Dimensions
Model:
@ 4 ohms 0.1% THD
Single channel driven 210
All channels driven 4 x 200W
Bridge mode
8 ohm load
2 x 400W
4 ohm load 2 x 600W
28.3
@ 1kHz <0.020 ohms
(@ 1kH re 8 ) > 400:1
>40 V/µs
@ 1KHz
Rated Power into 4 ohms (-3dB)
SY4200
Output Power
Voltage Gain
Output Impedance
Damping factor
Slew rate
Per Channel
W
ohms
15 Hz- 60 kHz
H,W,D = (87 x 482x400) mm
Shipping Weight = 14 Kg
Frequency response
Dimensions