A&D 2 Plus - Manual (Page 7)

OVERVIEW
The Monitor 2+ is able to display the details of the last 19 dives. Any
dive that lasts two minutes or longer is entered into memory. After
the memory is filled with all 19 dives, the oldest dive is deleted for
each new dive entered. All the dive information stays in memory
until the battery is removed.
The illustration on the opposite page shows all the information that
is logged for each dive.
DOWNLOADING THE MEMORY TO A PC
With the use of a separate interface kit, the Monitor 2+ has the
ability to download the details of the last 37 dives to an IBM
compatible computer. In addition, detailed information on the last
200 minutes of diving, sampled every 20 seconds, allows the software
to plot a graph depicting your actual dive profile and display the
computer information anywhere along the profile.
The interface kit and software available from your Authorized U.S.
Divers dealer.
Note: The procedures for downloading data to a personal computer are
described in the manual that comes with the interface kit.
MEMORY MODE ACTIVATING MEMORY MODE
From Ready Mode or Surface Mode,
touch contacts A & C. The computer
will emit one beep and the Memory
Mode icon will appear at the top of
the screen. If activating from Surface
Mode, the current surface interval
also appears.
Touch Contacts A & D to confirm the selection. After a few moments,
the information for the most recent logged dive appears.
Note: If you are only checking surface time, you can immediately return
to Surface or Ready Mode by touching contacts A & B instead of
touching A & D.
SCROLLING THROUGH LOGGED DIVES
To scroll back through the last 19 dives in memory (towards the
oldest dive), touch contacts A & C. To scroll forward through the
memory (towards the most recent dive), touch contacts A & B.
Activating Memory Mode from
Surface Mode
Confirm the selection by
touching contacts A & D
Typical Memory Mode
display
Scroll forward through
memory by touching contacts
A & B
Scroll back through memory
by touching contacs A & C
EXITING MEMORY MODE
To exit Memory Mode, touch contacts A&D. If there is no activity for
three minutes while in Memory Mode, the computer will automati-
cally switch back to Surface or Ready Mode.