American Dryer Corp. AD-115ES II - Manual (Page 30)

26
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the left side panel behind top/access control door. In the case of 208 VAC
or 240 VAC, the supply voltage must match the electric service specifications of the
data label exactly.
WARNING: 208 VAC AND 240 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
IMPORTANT: 380, 400, and 416 Volt dryers are built 4-wire only. Customer must contact the
factory to special order 3-wire systems.
ADE-115ES (60 Kw Electric Oven) Reversing, 3ø M otor
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY.
Calculate/determine correct fuse value, by applying either local and/or National Electrical Codes to listed
appliance amp draw data.
B. Circuit breakers are thermal-magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size
according to appliance amp draw rating and type of breaker used.
C. Circuit breakers for 3-phase (3Ø) dryers must be 3-pole type.
OVEN SIZE
(Kw)
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW MINIMUM
WIRE SIZE
FUSING
CIRCUIT
BREAKER
60 Hz 50 Hz
Dual Element
Time Delay
60 208 3ш 3 181 -- * 250 250
60 240 3ш 3 159 161 * 200 200
60 380 3ш 4** -- 100 * 125 125
60 400 3ш 4** -- 95 * 125 125
60 416 3ш 4** -- 92 * 125 125
60 460 3ш 3 83 * 125 125
60 480 3ш 3 80 * 100 100
60 575 3ш 3 66 * 100 100
*AWG Stranded Wire Type...size wire as per National Electrical Code or local codes.
(Motor lead wire is recommended.)
**3-wire available.